- UV- and scratch-resistant ETFE coating
- 6 mounting holes
- 12" cable with optional waterproof extensions
- Waterproof (IP67)
- UV resistant ETFE coating
- Durable and lightweight
- High efficiency monocrystalline cells: 20%
- Compatible with the Large Solar Panel Bracket using our ETFE Panel Screw & Washer Set
- 22.3 x 27.4 x 0.4 cm
- 328 grams
- Open Circuit Voltage: 20.45V
- Peak Voltage: 17.34V
- Peak Current: 570mA
- Peak Power: 9.92W
- Power Tolerance: +/-10%
- For maximum power output, orient the panel towards the sun
- Matte ETFE coating
- 2.0mm FR4
- Cable Length: 50cm
- Cable Color: Red PU Coated
- Plug: Waterproof Male 3.5x1.1mm
- Extend the cable length using 1 foot, 4 foot, and 10 foot extension cables
- Solder directly to a PCB using extension with exposed leads
- 2 year warranty on solar panels
- For more warranty information, see the warranty guide
- UV- and scratch-resistant ETFE coating
- 6 mounting holes
- 12" cable with optional waterproof extensions
- Waterproof (IP67)
- UV resistant ETFE coating
- Durable and lightweight
- High efficiency monocrystalline cells: 20%
- Compatible with the Large Solar Panel Bracket using our ETFE Panel Screw & Washer Set
- 22.3 x 27.4 x 0.4 cm
- 328 grams
- Open Circuit Voltage: 20.45V
- Peak Voltage: 17.34V
- Peak Current: 570mA
- Peak Power: 9.92W
- Power Tolerance: +/-10%
- For maximum power output, orient the panel towards the sun
- Matte ETFE coating
- 2.0mm FR4
- Cable Length: 50cm
- Cable Color: Red PU Coated
- Plug: Waterproof Male 3.5x1.1mm
- Extend the cable length using 1 foot, 4 foot, and 10 foot extension cables
- Solder directly to a PCB using extension with exposed leads
- 2 year warranty on solar panels
- For more warranty information, see the warranty guide
Battery Compatibility
Compatible with the V88 Universal Laptop Battery Pack.View More Small Solar Panels
1 Review
-
Slick Panel
Posted by NickI was unsure what this panel was all about and we use many of the similar versions so I just bought one. I think we might change over to using this panel. It is very light! Output is the same as the other panel, but it does have matte looking finish to it. I believe if one were to pot this in epoxy/urathane/etc I believe that will go away.
As always, they provide a complete kit with all the mounthing hardware. I am thinking I will buy a few of these for some personal projects I have up my sleeve.
Overall, very cool!